Step 1:

Take your smartphone and put it in the Holder horizontally (landscape). The Holder is spring loaded at the top. To insert your phone into the Holder, pull the top portion of the Holder upwards and slide your phone in.

The camera should be roughly located at the center of the Lamp.U. Don’t worry too much about positioning for now, we will adjust them in later steps.

Note: if you are using a larger phone, you may have to remove your phone case

Step 2:

Pull slightly the top of the Holder, loosening it slightly, move your smartphone left or right so that the camera is centered on the device.

Step 3:

Behind the Holder, there is a small adjustment screw. Loosen it slightly so that you can move the Holder up & down.

Move your Holder and smartphone so that the camera is level and aligned with the LEDs.

After you are satisfied, tighten the small screw to lock the position in place.